DICE Silverline DUO Guia de Instalação

DICE interface for iPod for selected BMW/Mini Cooper vehiclesInstallation Guide/User ManualO

Lock LockBefore connecting the iPod to the DICE interface, turn the hold switch ON to enable locked mode. For operation in locked mode, please see use

InstallationNote: Installation should only be performed by a qualified professional. Beware of sharp edges to avoid injury and exercise caution when

ATTENTION! There are two 3-pin connectors presented in the vehicle. During installation, make sure that the 3-pin connector from the vehicle does not

8 Remove bottom seat cushion by lifting up and route wiring underneath.9 Route the remainder of the interface cable in the best possible location (ie

If your vehicle has , the purchase of a DICE DSP kit is necessary.To see if your vehicle has DSP look for a bare metal coax cable and a 3-pin connect

The interface automatically charges the battery of the iPod when connected and your vehicle ignition key is in the ACC/ON position.Charging m

16Press or to select Silverline DUO. Pressing this button repeatedly will cycle throughAudio Source Selection:Use the

Source indicatorUse button 1 - 6 to change between DISC numbers.123456- -SC MODEAM FMm+Press the MODE button to access the interface. Press and

INFO1 42 53 6FM AMMODETONE SELECTMENUCDC 2-01 01/02/2008 Press the MODE button to access the interface. Turn the jog dial to change track. Note that

The Silverline DUO integration kit features content browsing. After connecting the iPod, select the desired browsing mode by selecting the appropriate

2Copyrights and TrademarksCopyright 2011 DICE Electronics, LLC. The DICE Electronics logo is a trademark of DICE Electronics, LLC.iPod is a trademark

20SIRIUS browsing function The Silverline DUO integration kit features SIRIUS connectivity. Use seek button or turn the tune dial to browse between su

21The interface is equipped with a 1/8” AUX jack connection adapter to connect an auxiliary device, such as an MP3 player, DVD player or other audio s

22TroubleshootingProblem SolutionNo text display. Make sure DIP switch settings are correctly set for text display (refer to p.9 for dip switch settin

23TroubleshootingProblem SolutionNo audio from iPod source. Reset the iPod. Inspect the dock connector, make sure it clicks to the iPod when connected

Disclaimer24Important disclaimer, please read!Unauthorized reproduction or reverse engineering is strictly prohibited! Intellectual property included

25DICE Electronics strongly recommends that the unit be installed in an easily accessible place! DO NOT PLACE IT BEHIND THE RADIO!Whether the unit is

26Installation notes:Installed by:Install date:Other notes:Illustration:

BMW compatible integration for iPodwww.diceelectronics.comBMW-DUO 2011-3-7

Table of contentsCopyrights and trademarks 2Icon legends 3 Warning and safety 4Product registration 5Integration kit contents 6DIP sw

4Warning and safety!Please read these instructions carefully before proceeding. Failure to follow instructions may result in improper operation or inj

Congratulations on your purchaseThank you for purchasing the DICE integration kit for iPod. Please review our user manual and installation guide befor

Integration kit contents1x Vehicle specific interface unit1x Vehicle specific harness1x USB upgrade cable1x iPod docking cable1x User manual6DICE

7Supported iPod models and firmware version requirements* Special cable (sold separately) require to connect iPad products.For the latest firmware ver

Dip switchesThe dip switches located on the DICE module are used to configure its operating mode. Incorrect dip switch settings may cause the kit to w

Dip switch settings OFF OFF ON OFF9Car configuration switchesSelected modesBusiness CD Radio Navigation RadioDip switch 1OFF OFF ON OFFRecommended fo